Available From Stock April 2016
Our extendable T15 extendable festoon harness is suitable
for indoor and permanent outdoor installation. Constructed using high quality
tough but extremely subtle rubber cable which is tested to operate to work
temperatures at -40˚c
The 50m sections can be joined together to varied lengths, the
distances you can create from a single start cable is subject to the lamp style
and wattage you choose.
To give you some idea of the varied lengths you can create using
just a single power supply point. If you use our lowest wattage 0.5w LED golf
ball lamp you could extend up to 5600m to the other extreme should you choose a
40w vintage squirrel cage lamps the maximum distance you could create from a
single power point would be 70m. These figures are based on lamp spacing of 1m.
Each of our festoon lamp listings indicate the distances you
can create when using Lamp holders spaced at either 1m or 0.5m spacing.
To view our range of Festoon Lamps Click Here
When using the T15 harness a separate start cable is necessary for connection to the power supply, the code reference is T15WSC this is to be ordered separately.
We also offer an intermediate cable which you can use increase the distance from the power supply point to the first lamp; it can also be used between harness sections. Reference code for the intermediate cable is T15WEX.
Technical Data
- Harness Material: Flat
White Rubber Festoon Cable 1.5mm
- Lamp Holder: Moulded
BC Socket with Silicon Rubber Seals
- Harness Length: 50m
- Lamp Holder: 50
x BC (B22)
- Spacing: 1m
- Max Load: 3000w
(12.5amp)