An attractive yet functional compact bollard manufactured in an oiled Iroko hardwood column available in a choice of light or dark finish.
Oak and Walnut timbers are also available to special order at extra cost.
The column is fitted with a compact stainless steel down light on one side of the hardwood column, this provides light directly to the floor area. The light source is a single high powered Luxeon LED. The bollard is supplied complete with an individual driver to provide secondary low voltage supply to the enclosed single high powered LED.
Other personalised versions are avaialable
Application
Decking, Patios, Walkways, Driveways, General Demarcation
Technical Information
* Bollard height: 680mm
* Width: 140mm
* Depth: 60mm
* Projection of inset light: 30mm
* Location plate: 150mm x 1430mm
* Locations screws: 4x stainless steel
* Light source: Single white high powered Luxeon LED (Other colours available to special order)
* Driver: Constant current LED driver
Installation
All GC products are supplied with individual installation information detail which should be followed accordingly. We recommend that installation should be carried out by a qualified electrician.
General Care and Maintenance of your GC Exterior Light Fitting
The glass block should be wiped over with a damp cloth periodically. If in a hard water area, it is recommended that the glass block be covered with a polyethylene bag when spraying the garden. Any wooden parts to the light fittings should be treated annually with a proprietary natural oil product as this will keep the wood in pristine condition and maintain its attractive natural appearance. To keep its appearance and condition the stainless steel components should be periodically wiped over with fine machine oil.
Please Note: If the light fittings have been purchased without the LED driver, please note that the High Powered LED fitted into the fitting should be wired in SERIES and not parallel. If you are unsure about this please consult a local electrician. The LED should be used in conjunction with a constant voltage LED driver. Do not install an off/on switch on the low voltage side of the power supply.
Delivery
These fittings are made to order only and delivery is normally up to 28 days from receipt of order. A 50% deposit is required at point of ordering, the remaining balance on despatch. No charge is made for delivery within the UK Mainland only. For a firm delivery date please telephone our sales office.
